Author Topic: Clearing a Mauser 1914  (Read 4475 times)

0 Members and 1 Guest are viewing this topic.

pejaenke

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Clearing a Mauser 1914
« on: February 26, 2018, 05:51:38 AM »
Does anybody know how to clear a 1914 without firing off all the rounds in the magazine? 

How do you release the slide to open the chamber if there is a round from the magazine already in the chamber from the previous cycling? 

I was at the range with a friend who was firing this gun for the first time.  The range was called cold with the last round in the chamber.  He could not rack the slide back to remove that round and clear the gun, so he safed the gun and removed the mag, and had to just set the gun down.  When the range was hot again, we tried again to clear the chamber, but couldn't so he fired the final round. 

I don't believe that this is how that weapon is supposed to work, is there a slide release to open the slide and clear a round without firing as most guns have?  Is the mechanism just worn? 
« Last Edit: February 26, 2018, 06:24:30 AM by pejaenke »

1914mauser

  • Trusted Contributor
  • *****
  • Posts: 781
  • Karma: +28/-0
    • View Profile
Re: Clearing a Mauser 1914
« Reply #1 on: February 26, 2018, 07:54:45 AM »
With the magazine out and the chamber cleared. Quickly pull the slide back, without maintaining a grip on it, allow it to release at once. The slide should close and you can insert a full or empty magazine to release the striker by pulling the trigger. This is not common knowledge. Every reference I have read says you have to insert the magazine to release the slide. You can also release the slide with a pencil or stick by inserting into the magazine well and pushing the hold open mechanism up like a magazine would.

Regards, 
B. Mason
NAPCA member, NRA life member
aim small, mis small

pejaenke

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: Clearing a Mauser 1914
« Reply #2 on: February 26, 2018, 07:52:41 PM »
Thanks for responding 1914mauser, he had a different problem, had fired off all the rounds in magazine except one, which was in the chamber.  The magazine was empty.  We could not get the slide to release to slide back and eject that unspent round, we tried with the mag both in and out. 

There must be a way to rack the slide to eject a round without firing it. 

After clearing the round (by firing it when the line went hot again) we noticed the little button adjacent to the trigger on the left side of the gun. See the attached picture.  Could that be a release to rack the slide? 

1914mauser

  • Trusted Contributor
  • *****
  • Posts: 781
  • Karma: +28/-0
    • View Profile
Re: Clearing a Mauser 1914
« Reply #3 on: February 27, 2018, 07:39:14 AM »
That is the trigger bar. The only thing that would lock the slide, on a properly functioning 1914, is if the safety is engaged. The pistol is blow back operated so nothing should keep the slide from being pulled back with one in the chamber.

Regards,
B. Mason
NAPCA member, NRA life member
aim small, mis small

pardt

  • Trusted Contributor
  • *****
  • Posts: 196
  • Karma: +6/-0
    • View Profile
Re: Clearing a Mauser 1914
« Reply #4 on: February 27, 2018, 02:03:56 PM »
I agree with Burgess that most likely the safety was engaged which locks the slide.