Author Topic: mauser 1910  (Read 613 times)

0 Members and 1 Guest are viewing this topic.

saxon

  • Full Member
  • ***
  • Posts: 65
  • Karma: +2/-0
    • View Profile
mauser 1910
« on: April 18, 2019, 04:56:53 PM »
I have had several 1910's over the years and am somewhat familiar with them.I just purchased one and was taking it apart for cleaning when I found the last three serial numbers stamped on the side plate,which is normal, but also on the disconnector  trigger bar and the ejector and hold open device.It's the only one I've seen.
What's up?

1914mauser

  • Hero Member
  • *****
  • Posts: 637
  • Karma: +24/-0
    • View Profile
Re: mauser 1910
« Reply #1 on: April 19, 2019, 08:40:58 AM »
What is the serial number? and are we discussing a .25 or .32 caliber example? The earlier variations had more of the internal parts numbered than the later models.

Regards,
B. Mason
NAPCA member, NRA life member
aim small, mis small

saxon

  • Full Member
  • ***
  • Posts: 65
  • Karma: +2/-0
    • View Profile
Re: mauser 1910
« Reply #2 on: April 19, 2019, 10:43:46 AM »
I thought all 1910"s were 6.35mm. Serial number 107442.

1914mauser

  • Hero Member
  • *****
  • Posts: 637
  • Karma: +24/-0
    • View Profile
Re: mauser 1910
« Reply #3 on: April 19, 2019, 12:47:23 PM »
Yes, 1910 is usually used to describe the .25 caliber variations. 107442 is a 1910/14 new model and should have numbered internal parts as you describe.

Regards,
B. Mason
NAPCA member, NRA life member
aim small, mis small

saxon

  • Full Member
  • ***
  • Posts: 65
  • Karma: +2/-0
    • View Profile
Re: mauser 1910
« Reply #4 on: April 19, 2019, 04:20:52 PM »
Thank you Burgess.

1914mauser

  • Hero Member
  • *****
  • Posts: 637
  • Karma: +24/-0
    • View Profile
Re: mauser 1910
« Reply #5 on: April 20, 2019, 09:43:19 PM »
You are welcome!

Regards,
B. Mason
NAPCA member, NRA life member
aim small, mis small