Author Topic: Problem with my HSc  (Read 10737 times)

0 Members and 1 Guest are viewing this topic.

donp326

  • Trusted Contributor
  • *****
  • Posts: 107
  • Karma: +7/-0
    • View Profile
Problem with my HSc
« on: July 07, 2014, 08:20:41 AM »
Every now an then I shoot my HSc.  Well this time when I finished shooting I noticed the extractor, the extractor pin (front) The extractor spring and the the extractor pin rear at the safety end may also be missing but I can't really tell.  If any one has these parts that they are willing to sell I need them to put my HSc back in working order. 

I forund and extractor and extractor spring on the Numerich website so all I need now id the Extractor plunger and the Safety detent plunger


Tom Heller had the Extractor and Safety Detent plungers so I'm set.
« Last Edit: July 07, 2014, 01:21:31 PM by donp326 »

jcorl

  • Trusted Contributor
  • *****
  • Posts: 687
  • Karma: +14/-1
    • View Profile
Re: Problem with my HSc
« Reply #1 on: July 07, 2014, 02:43:50 PM »
Good luck with that job.


Jim
Jim

donp326

  • Trusted Contributor
  • *****
  • Posts: 107
  • Karma: +7/-0
    • View Profile
Re: Problem with my HSc
« Reply #2 on: July 09, 2014, 03:05:51 PM »
Thanks I'll post how it went upon completion.

jcorl

  • Trusted Contributor
  • *****
  • Posts: 687
  • Karma: +14/-1
    • View Profile
Re: Problem with my HSc
« Reply #3 on: July 11, 2014, 02:48:39 PM »
Looking forward to your report of success or "other".

Jim
Jim

donp326

  • Trusted Contributor
  • *****
  • Posts: 107
  • Karma: +7/-0
    • View Profile
Re: Problem with my HSc
« Reply #4 on: July 17, 2014, 08:23:03 PM »
Ending up sending the slide etc to Tom Heller (Lugardoc).  Too much for my thumbs to do.

jcorl

  • Trusted Contributor
  • *****
  • Posts: 687
  • Karma: +14/-1
    • View Profile
Re: Problem with my HSc
« Reply #5 on: July 22, 2014, 09:29:37 AM »
I was wondering, if you could master that task.  Good decision.  I know, he will do a bag up job.  My thumbs are just as big as yours.  Thanks for sharing your efforts.  It makes me feel better related to my efforts on the HSc.

Jim
Jim

donp326

  • Trusted Contributor
  • *****
  • Posts: 107
  • Karma: +7/-0
    • View Profile
Re: Problem with my HSc
« Reply #6 on: July 28, 2014, 02:11:50 PM »
He accidently sent me an incorrect plunger that was too big (long).  That increased the spring tension horrendously.  I sent it all back to him and he fixed it the day after he got it.  I get it back two days after that. It looks great and shoots just a good as before.

jcorl

  • Trusted Contributor
  • *****
  • Posts: 687
  • Karma: +14/-1
    • View Profile
Re: Problem with my HSc
« Reply #7 on: July 28, 2014, 03:23:37 PM »
Gee.  I bet you were trying everthing!!   Happy to hear that it came out great.  I did not know they had made a short and long plunger?   That fact is interesting.  Thank you again for sharing your experience.

Jim
Jim

donp326

  • Trusted Contributor
  • *****
  • Posts: 107
  • Karma: +7/-0
    • View Profile
Re: Problem with my HSc
« Reply #8 on: July 29, 2014, 07:40:55 AM »
Yes I did, spent several hours before giving up.  The incorrect plunger was in the white.  I am not sure what flavor of HSc it was for. The small end of it would not seat into spring.  That's what gave me the spring compression issues.

jcorl

  • Trusted Contributor
  • *****
  • Posts: 687
  • Karma: +14/-1
    • View Profile
Re: Problem with my HSc
« Reply #9 on: July 29, 2014, 10:05:03 AM »
Interesting observation.  I wonder if the post war and war ear plungers were manufactured to different specifications.  Or, in reverse, your plunger was not manufactured to correct specs in the first place.  Thanks again for sharing your experience.  It may help one of us, some day. 

Jim
Jim

donp326

  • Trusted Contributor
  • *****
  • Posts: 107
  • Karma: +7/-0
    • View Profile
Re: Problem with my HSc
« Reply #10 on: July 30, 2014, 07:21:41 AM »
I asked Tom Heller yesterday what the in the white plunger was for.  He told me he wasn't exactly sure but possibly a Walther PP.
« Last Edit: July 30, 2014, 02:10:14 PM by donp326 »

jcorl

  • Trusted Contributor
  • *****
  • Posts: 687
  • Karma: +14/-1
    • View Profile
Re: Problem with my HSc
« Reply #11 on: July 30, 2014, 10:27:42 AM »
The plunger was white?
Jim

donp326

  • Trusted Contributor
  • *****
  • Posts: 107
  • Karma: +7/-0
    • View Profile
Re: Problem with my HSc
« Reply #12 on: July 30, 2014, 02:09:00 PM »
Yes it was