Author Topic: Last manufacture  (Read 3315 times)

0 Members and 1 Guest are viewing this topic.

saxon

  • Full Member
  • ***
  • Posts: 65
  • Karma: +2/-0
    • View Profile
Last manufacture
« on: October 22, 2014, 06:00:17 PM »
Anyone know when the last 1910 was manufactured? Any guess on the approximate serial number? Was there an overlap with the 1934? Thank you in advance.

1914mauser

  • Hero Member
  • *****
  • Posts: 637
  • Karma: +24/-0
    • View Profile
Re: Last manufacture
« Reply #1 on: October 23, 2014, 07:16:42 AM »
Yes, 428,000, overlap?
Regards,
 
B. Mason
NAPCA member, NRA life member
aim small, mis small

saxon

  • Full Member
  • ***
  • Posts: 65
  • Karma: +2/-0
    • View Profile
Re: Last manufacture
« Reply #2 on: October 23, 2014, 05:34:32 PM »
Burgess,
By overlap I mean were the 1910's being made at the same time as the 34's? Know what year the 1910 production was halted in favor of the 34's?
Lots of dumb questions..thank you..

1914mauser

  • Hero Member
  • *****
  • Posts: 637
  • Karma: +24/-0
    • View Profile
Re: Last manufacture
« Reply #3 on: October 24, 2014, 09:43:44 AM »
The .25 caliber pocket models were made till 1940. The proof of this is the last few hundred will have the Eagle/N proof. Thousands of 1934 examples have the Eagle/N proof. They were made up to 1941. At that time production of the HSC was under way and production of the pocket and vest pocket models ceased. Not in favor of one over the other but in favor of the HSC? It is not known if any pocket models were assembled from parts left in the factory post war by the French but they did assemble HSCs and some WTP IIs and then went on to produce HSCs, P-38s, K98k and a .22 rifle.

There are no dumb questions. I just did not understand what you meant.

Regards,
« Last Edit: October 24, 2014, 09:47:22 AM by 1914mauser »
B. Mason
NAPCA member, NRA life member
aim small, mis small

saxon

  • Full Member
  • ***
  • Posts: 65
  • Karma: +2/-0
    • View Profile
Re: Last manufacture
« Reply #4 on: October 24, 2014, 08:37:22 PM »
Thank you Burgess..