Author Topic: ZF-41 dimensions  (Read 5818 times)

0 Members and 1 Guest are viewing this topic.

Blades

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
ZF-41 dimensions
« on: October 03, 2015, 03:26:03 PM »
Hello, I am trying to find the dimensions of a ZF-41 optic, specifically the diameters of the areas that connect with the mounting rings and the inside diameter of the mounting rings. If anyone can help me out with this i would be extremely grateful!
(Attached is a picture showing where I need the dimensions)

jcorl

  • Trusted Contributor
  • *****
  • Posts: 687
  • Karma: +14/-1
    • View Profile
Re: ZF-41 dimensions
« Reply #1 on: October 16, 2015, 02:44:32 PM »
Do you have a set of dividers?


Jim
Jim

Blades

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: ZF-41 dimensions
« Reply #2 on: October 16, 2015, 05:14:16 PM »
@jcorl


No, I do not.

jcorl

  • Trusted Contributor
  • *****
  • Posts: 687
  • Karma: +14/-1
    • View Profile
Re: ZF-41 dimensions
« Reply #3 on: October 16, 2015, 06:44:36 PM »
And I then assume you do not have a mic gauge.  Few people do.  Do you have a local gunshop / gunsmith that could help you out?  Many small towns have a shop with machine tools to verify diameters.  A true machine shop would have the tool you needed.  Some small automotive repairs shops have them also. Engine rebuild shops. Anyone that works with steel will have what you need. 

Jim
Jim

Blades

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: ZF-41 dimensions
« Reply #4 on: October 16, 2015, 09:35:20 PM »
@jcorl

There is a registered gunsmith in my town, yet I doubt he has a ZF-41 to measure. I don't know anyone who has one actually.