Author Topic: C96 Stock repair  (Read 3605 times)

0 Members and 1 Guest are viewing this topic.

pgbarrow

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
C96 Stock repair
« on: March 12, 2017, 03:44:14 PM »
Hi everyone,
 
  I have a C96 stock which needs some work.  The bore for the stock bracket screw is about 1/2 inch while the screw is only 1/4.  I was thinking some wood putty or a dowel rod, then drill out the right sized hole.  The bracket is also slightly out of alignment so the screw will not properly line up, I would estimate I need to bend it inwards about 10 degrees.  Any thoughts on how to repair this before I get our the blow torch?  Sorry no pictures, everything I have tried to attach was too large. 

Paul