Author Topic: recoil spring and needle spring sizes  (Read 4079 times)

0 Members and 1 Guest are viewing this topic.

the_key

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
recoil spring and needle spring sizes
« on: July 02, 2017, 12:29:22 AM »
Hello all. I'am new at the forum and I believe that here I can study a  lot for my favorite old pistol. My problem is that I need information about the lenght, the inside diameter and the thickness of the recoil spring and the spring for the needle. The pistol is mauser 1914, cal 6.35, nikel plated. So, can you help me, please? :)

1914mauser

  • Trusted Contributor
  • *****
  • Posts: 781
  • Karma: +28/-0
    • View Profile
Re: recoil spring and needle spring sizes
« Reply #1 on: July 02, 2017, 10:43:27 AM »
Welcome to the forum,

You can order a set of replacement springs for your pistol from Wolf springs. If you need springs. If you are just looking for measurements I still recommend you order a set of springs and take the measurements yourself to prevent confusion.

Regards,
B. Mason
NAPCA member, NRA life member
aim small, mis small

the_key

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: recoil spring and needle spring sizes
« Reply #2 on: July 02, 2017, 01:24:34 PM »
Thank you very much for the information!  8)

saxon

  • Trusted Contributor
  • *****
  • Posts: 65
  • Karma: +2/-0
    • View Profile
Re: recoil spring and needle spring sizes
« Reply #3 on: July 03, 2017, 08:35:12 PM »
 I think its a Mauser 1910.