Mauser Guns Collectors Forum
Pistols => Model 1914 Pistol => Topic started by: 2x2 on May 10, 2013, 06:53:53 PM
-
:( When reassembling I couldn't get to slide to lock....Like an idiot I put the firing pin and spring in backwards and now after putting the slide back on I can't get it off. It only moves about 1" forward.
Help!!!
-
Take off the grip and remove the magazine catch, then you may be able to remove the slide. Regards,
-
Thank you very much. I'll keep that in mind the next time I lose my mind.
The firing pin sear had ridden backwards over the lower trigger link sear or what ever it is. I was able to get a jeweler's screwdriver in a space between the slide and the top left of the trigger link; pry it down enough to move the firing pin sear back. Then I was able to remove the slide and everything is OK now.