Pistols > Model HSC Pistol

Noob to the board and the HSC, anyone know the year of my Mauser HSC? D1 5439

(1/2) > >>

ksprenger:
Anyone know the year of my Mauser HSC
says D1 5439 on the side.

Warbird:
Welcome to the Forum, ksprenger.  Your .380 HSc (correct serial number is 01.5439) was produced by Mauser in 1970.  "01" is .380 caliber and "00" is .32 caliber in the serial number.  Anything else let me know.

ksprenger:
thanks
I took it out shooting over the weekend, jammed about every 3 shots, I had some winchester 380 ammo.

Warbird:
Not the ammo.  Most likely Magazine Lips, Magazine Spring, or Recoil Spring.  If you have another Magazine, try it.  If same problem occurs then replace Recoil Spring.  Otherwise replace Magazine Spring.  Both Springs can be purchased new from Wolff Gunsprings here:

https://www.gunsprings.com/MAUSER/HSc%20(EARLY%20MODELS)/cID1/mID40/dID171

Let me know how you make out.

ksprenger:
I dont have another magazine to try.  Thanks for the link, maybe i should just get them.

Navigation

[0] Message Index

[#] Next page