Author Topic: Model 10/34 with some extra bits  (Read 8267 times)

0 Members and 1 Guest are viewing this topic.

vlim

  • Trusted Contributor
  • *****
  • Posts: 461
  • Karma: +54/-0
    • View Profile
Model 10/34 with some extra bits
« on: May 05, 2020, 11:47:53 AM »
Serial number is a tad low for the 1934 grips, the manual is dated May, 1936 (updated after typo).


« Last Edit: May 05, 2020, 03:01:06 PM by vlim »

1914mauser

  • Trusted Contributor
  • *****
  • Posts: 790
  • Karma: +28/-0
    • View Profile
Re: Model 10/34 with some extra bits
« Reply #1 on: May 05, 2020, 01:09:55 PM »
Gerben, I think you made a typo. Isn't the manual date 5/1936? In the data I have compiled there is an example in the 398000 SN range that has the curved grip. There is also one lower than 400000 that had the grip replaced with a curved grip as I had recorded it earlier with a straight grip. There is  often some overlap in changed features during Mauser production. It is difficult if not impossible to precisely state when a change occurred. It is a very nice example.

Regards, 
B. Mason
NAPCA member, NRA life member
aim small, mis small

vlim

  • Trusted Contributor
  • *****
  • Posts: 461
  • Karma: +54/-0
    • View Profile
Re: Model 10/34 with some extra bits
« Reply #2 on: May 05, 2020, 03:00:26 PM »
Correct. Its 5-1936.

Christophe

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
    • View Profile
Re: Model 10/34 with some extra bits
« Reply #3 on: May 07, 2020, 01:40:31 PM »
Great rig, conrats  :)