Author Topic: Split-base floor plate removal  (Read 7664 times)

0 Members and 1 Guest are viewing this topic.

Rapidrob

  • Newbie
  • *
  • Posts: 19
  • Karma: +2/-0
    • View Profile
Split-base floor plate removal
« on: July 19, 2020, 10:07:39 AM »
what is the safe way to remove the splip-base type floor plate from the 1910 magazine body base? It looks just to be spring/friction held in place?
Gulf of Tonkin Yacht Club
NRA Endowment Member
President New Mexico Military Surplus Rifle Pistol Shooters
NM MILSURPS

Pjb11661

  • Member
  • *
  • Posts: 32
  • Karma: +0/-0
    • View Profile
Re: Split-base floor plate removal
« Reply #1 on: July 19, 2020, 01:10:18 PM »
The bottom end of the magazine spring forms a lock for the base plate.  Using the side cutouts in the magazine, you need to work the bottom of the spring up and out of the way before you tap the baseplate off.

Rapidrob

  • Newbie
  • *
  • Posts: 19
  • Karma: +2/-0
    • View Profile
Re: Split-base floor plate removal
« Reply #2 on: July 19, 2020, 11:06:49 PM »
Good idea. I'll give that a try.
Gulf of Tonkin Yacht Club
NRA Endowment Member
President New Mexico Military Surplus Rifle Pistol Shooters
NM MILSURPS

Rapidrob

  • Newbie
  • *
  • Posts: 19
  • Karma: +2/-0
    • View Profile
Re: Split-base floor plate removal
« Reply #3 on: July 20, 2020, 10:40:53 AM »
That worked just fine. Thanks.
Gulf of Tonkin Yacht Club
NRA Endowment Member
President New Mexico Military Surplus Rifle Pistol Shooters
NM MILSURPS