Pistols > Model 1914 Pistol

Nickel model 1914

(1/2) > >>

buckup:
I recently acquired a model 1914 second variant. I’m trying to get some info on this. It is nickel plated with walnut grips. The nickel plated finish appears to be factory and is in excellent condition as is the rest of the gun. I’ve not had any luck at my local gun shop in finding out much about it including value.  Any help would be much appreciated.

1914mauser:
If you can explain what you mean by "second variant" or better yet provide the serial number I should be able to tell you something about it. The nickel finish is most likely not original. Knowing exactly what you have will help determine if it could possibly be a factory finish. Pictures would be helpful as well.


Regards,

buckup:
The serial number is 8802. I’ll try to modify the picture file as it says it is too large to post.

buckup:
See attached picture

1914mauser:
Yes, you are correct it is a second model variation. I refer to these as 1914 early production. It is believed these were made in 1913. These followed the Humpback variation which were preproduction or prototypes. Approximately 10,000 of this second model variation were made. I have yet to see one that was factory nickel plated. There are examples of the Sidelatch .25 caliber model that were factory nickel plated and were produced before or around the same time as yours. These second model variations are pre WWI produced thus made for commercial consumption. Because of these 2 facts, a factory nickel finish cannot be ruled out. To verify it being an actual factory original finish would require an in hand inspection by someone with knowledge of period nickel finishes. It would be very exciting to have it verified as factory original. If it is you are to be congratulations on acquiring a rare example.

Regards,

Navigation

[0] Message Index

[#] Next page