Author Topic: Bolts  (Read 747 times)

0 Members and 1 Guest are viewing this topic.

fred klinknagel

  • Jr. Member
  • **
  • Posts: 43
  • Karma: +0/-0
  • in the workshop
    • View Profile
Bolts
« on: October 24, 2020, 02:44:30 PM »



 Just recieved 2 deactivated c96 bolts from an old German collector.


 Pic  1: the two bolts


 Pic   2: same , with a bolo bolt


 

fred klinknagel

  • Jr. Member
  • **
  • Posts: 43
  • Karma: +0/-0
  • in the workshop
    • View Profile
Re: Bolts
« Reply #1 on: October 24, 2020, 02:47:11 PM »



 Large ring and cone hammer ?

fasenda

  • Newbie
  • *
  • Posts: 16
  • Karma: +0/-0
    • View Profile
Re: Bolts
« Reply #2 on: October 27, 2020, 02:11:36 PM »
The one on the left is from the big ring hammers. The lock on the right is said to come from a bolo with a small ring hammer with the serial number 40398.
« Last Edit: October 28, 2020, 03:51:24 AM by fasenda »

fred klinknagel

  • Jr. Member
  • **
  • Posts: 43
  • Karma: +0/-0
  • in the workshop
    • View Profile
Re: Bolts
« Reply #3 on: October 30, 2020, 04:45:54 AM »
 40398 ?  there is only 398 visible.

fasenda

  • Newbie
  • *
  • Posts: 16
  • Karma: +0/-0
    • View Profile
Re: Bolts
« Reply #4 on: October 30, 2020, 05:53:44 AM »

Since I can speak English with a translation program, I prefer to show two pictures of the N 40216 pistol. You will understand the rest.




Best regards,
Fasenda

fasenda

  • Newbie
  • *
  • Posts: 16
  • Karma: +0/-0
    • View Profile
Re: Bolts
« Reply #5 on: October 30, 2020, 05:56:20 AM »
May I ask what number is on the large ring hammer clasp?

fred klinknagel

  • Jr. Member
  • **
  • Posts: 43
  • Karma: +0/-0
  • in the workshop
    • View Profile
Re: Bolts
« Reply #6 on: October 30, 2020, 12:41:45 PM »
number

fred klinknagel

  • Jr. Member
  • **
  • Posts: 43
  • Karma: +0/-0
  • in the workshop
    • View Profile
Re: Bolts
« Reply #7 on: October 30, 2020, 01:49:06 PM »
Bolt

fasenda

  • Newbie
  • *
  • Posts: 16
  • Karma: +0/-0
    • View Profile
Re: Bolts
« Reply #8 on: October 30, 2020, 03:15:53 PM »

Thank you so much!
And this is what the C96 looked like, from which your lock number 20467 comes.

vietvet191

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
    • View Profile
Re: Bolts
« Reply #9 on: November 01, 2020, 08:40:26 AM »
I may be wrong (I've only been collecting C96's for about 6 years), but I believe the bolt on the left is from a Cone Hammer.  The firing pin was changed to the "lug type" with the Large Ring.The bolt on the right appears to have the "lug type" firing pin with two lugs.  This is confusing because it also has the long extractor.  I thought the two lug firing pin was introduced along with the short extractor with the small ring model.

fasenda

  • Newbie
  • *
  • Posts: 16
  • Karma: +0/-0
    • View Profile
Re: Bolts
« Reply #10 on: November 01, 2020, 09:33:27 AM »

I have already shown which weapon this lock comes from.
Despite the fact that the lock on the left resembles a Conehammer lock, it is certainly the lock of a Large Ring Hammer model. The round cutout at the end of the lock was specially made for the hammer of the large ring hammer.