Pistols > C96 / C12 Broomhandle

Lock frame help

(1/3) > >>

sharps_74:
So I bought a C96 and the guy told me that the sear was broken. I took it home expecting to replace the part and have it up and running. Well, he lied. The ear that is responsible for ejection is broken. This happens sometimes. What I'm wondering is if a piece can be welded on that would serve the purpose. Lock frames are hard to find as we all know. I hate to have a single shot 9mm laying around.

fasenda:
I don't know, but I personally didn't understand the question at all. What's wrong with the gun and what are you trying to weld? Is the extractor broken?

1914mauser:
Some pictures would be helpful because I not sure if you are referring to the bolt or the extractor or???
Regards,

sharps_74:
On the forward part of the lock frame there's a protrusion that serves as an ejector. That part is broken off on the C96 in question. The weapon has no problem with extraction.


This having to use the verification questions with every post is silly.

fasenda:
As mentioned previously, please provide pictures of the broken piece for further clarification.

Navigation

[0] Message Index

[#] Next page