Author Topic: HSc in nickel plate  (Read 253 times)

0 Members and 1 Guest are viewing this topic.

eprenzlow

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
HSc in nickel plate
« on: February 02, 2023, 12:09:26 AM »
Hi,


I found a HSc in 7.65 caliber that was very well treated over the years. Itís a beautiful model with slide and frame in nickel plating and hammer, trigger, safety and internals in blue. I believe the barrel may be stainless steel. There is no visible wear to the plating and it came with blue leatherette box, manual, test target and what appears to be an original receipt from the Ď80s. One magazine has a f,at floorplate, and the other has a finger rest.


Serial number is 00.12460  The slide and frame serials match and the last 3 digits are stamped on the underside of the barrel.


What would the manufacture date be? Iíll post pictures soon. 👍

eprenzlow

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: HSc in nickel plate
« Reply #1 on: February 02, 2023, 12:20:33 PM »
Photos as promised. Holster custom by Falco. I added the grips.




vlim

  • Trusted Contributor
  • *****
  • Posts: 447
  • Karma: +54/-0
    • View Profile
Re: HSc in nickel plate
« Reply #2 on: February 11, 2023, 08:00:31 AM »
Production year would be 1970.
Interarms offered the nickle plated version on the US market. These guns were FBM proofed (internal Mauser proof) and not commercially proofed for the German market, so they unfortunately have no proof dates.

eprenzlow

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: HSc in nickel plate
« Reply #3 on: February 11, 2023, 10:27:10 AM »
Thank you for the information. I have the HSc book due for delivery today and am looking forward to reading it but wasnít sure if the production date would be in the book for the Interarms imports.