Author Topic: Mauser HSc 7.65. mfg in 1970  (Read 2893 times)

0 Members and 1 Guest are viewing this topic.

trooper joe

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Mauser HSc 7.65. mfg in 1970
« on: February 17, 2023, 10:59:25 AM »
I have a question about my new acquisition, a 1970 HSc in 7.65 made in 1970.
This gun looks brand new and came with two magazines, a box, owners manual, and factory test target dated 1970.

I have not shot it yet but I noticed that the trigger/hammer assembly makes quite a “clicking” noise when cocking the hammer. It all seems to work OK but I was wondering if this noise is normal.
I had one of these about 15 years ago but knew nothing about the magazine insertion automatically closing the mag or the safety system. Thinking it was defective, I foolishly took it back to the dealer when in fact, there was probably nothing wrong with it. It may have been a .380 since I remember it had quite a recoil.
Any information about this would be appreciated.
Thanks ahead gang.
Trooper Joe
« Last Edit: February 17, 2023, 11:01:21 AM by trooper joe »


  • Trusted Contributor
  • *****
  • Posts: 461
  • Karma: +54/-0
    • View Profile
Re: Mauser HSc 7.65. mfg in 1970
« Reply #1 on: March 08, 2023, 02:28:35 PM »
Yes, that's normal.

Interarms imported a lot less .32's, so good catch.