Author Topic: Introduction  (Read 14763 times)

0 Members and 1 Guest are viewing this topic.

!tom

  • Newbie
  • *
  • Posts: 8
  • Karma: +0/-0
    • View Profile
Introduction
« on: March 02, 2023, 02:08:07 AM »
Hi all.


I just joined this group as I have inherited a Mauser 1910 from my father when he passed away. I know little about it other than he inherited it from his father when my grandfather passed away when I was around 1 year old.


I know my father had never used it in my lifetime; I suspect it probably had last been used in the 1950's or later.


I cleaned it up and have used it a few times at the range. As far as I know everything seems to be in working order, with the exception that occasionally it won't feed a round correctly.


The serial number is 291240. As far as I can tell that indicates it was manufactured in the 1920's, which would make it 100 years old.

mauserfan

  • Administrator
  • *****
  • Posts: 71
  • Karma: +10/-0
    • View Profile
Re: Introduction
« Reply #1 on: March 07, 2023, 09:28:24 AM »
Welcome!  Nice pistol. 
Yeah, sometimes the modern ammo doesn't feed properly.  Or the load spring in the mag may be weak due to being stored with ammo in it? 
I think there are a few topics here from the past where folks discussed ammo feeding issues.
Tim
Never Enough Mausers!

1914mauser

  • Trusted Contributor
  • *****
  • Posts: 790
  • Karma: +28/-0
    • View Profile
Re: Introduction
« Reply #2 on: March 08, 2023, 08:39:27 AM »
Welcome to the forum. Your 1910/14 Mauser was made in 1925. It is one of the most common variations of the .25 caliber pocket model. Feeding problems are usually due to the ammo, magazine or springs. Regards,
B. Mason
NAPCA member, NRA life member
aim small, mis small

geert45

  • Member
  • *
  • Posts: 54
  • Karma: +3/-0
    • View Profile
Re: Introduction
« Reply #3 on: March 12, 2023, 02:06:53 PM »
Welcome!!Geert

Jelectric

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: Introduction
« Reply #4 on: December 28, 2023, 12:00:48 PM »
Thank you for your response. I tried different ammo, an after market mag and a new ejector. Haven't tried a spring.