Pistols > Model HSC Pistol

Learning to hand polish feed ramp. First time.

<< < (2/2)

Laufer:
Jim, a miracle happened today. The 40 min. spent on first Hand polishing (or any polishing) of a feed ramp could have helped a small amount. The finest grit sand paper at Loews was 400, used in numerous tiny squares in a small vertical motion, perpendicular to the horiz. machine marks.

As a random combination alternative, used the other aftermarket magazine (but spring felt possibly weaker) and what might be the original recoil spring, leaving the newer Wolff in the bag.

Out of about fifty shots, there was only one FTF (feed). Could not believe it, and maybe it will last if nothing gets changed.
It would be best not to put much wear on a collector gun, but to have it working really well -so far- was rewarding.

jcorl:
Most pleased to learn of your feeding success.  Hope is was a straight shooter.  Sounds like it was a good day at the range.

Jim

Navigation

[0] Message Index

[*] Previous page