Pistols > Model HSC Pistol

Interarms HSc Slide Locking & Mag Seating Problems

<< < (3/5) > >>

vwpieces:
your Magazine looks OK. However my follower does sit higher out of the feed lips.

vwpieces:
More pics w/ mag inserted

Newbergian:
Great pictures. Thank you.
Yes, I see how your mag catch position appears the same as mine. However, your mag is fitting flush to the base of the pistol butt vs mine which is extending .040. It is the springy pressure from the mag safety that keeps the mag from seating all the way. It is as if the mag safety spring is too robust.  You see this in my image 8941. The mag safety is barely clearing the trigger catch.
I will see what the new mag catch coming in the mail does for me.
I may just buy another Interarms HSc that does not have this mag problem so I can take it apart !
Thank you again for those excellent photos.

vwpieces:
took off the slide & grip panel...

Newbergian:
Another set of good pictures. Exactly the perfect angle and sequence. You can see that your mag is fully inserted and properly lifting the mag safety, which mine is not doing. So, its either that mag catch or its the mag safety spring is too 'robust'.
I'll figure it out. Thanks for your help.

And don't dump the HSc for the HK4. That plastic piece in the HK4 sounds cheesy at best.

Navigation

[0] Message Index

[#] Next page

[*] Previous page