Pistols > Model HSC Pistol

Please help. I need two pieces for my HSC.

(1/1)

pakcman:
Hello all
My father have me a non working HSC. After disassembling it and comparing what I have to the parts diagram, I realize that I am missing the ejector assembly. I have found the ejector and the spring used online, but I cannot find the extractor plunger, or the safety detent plunger anywhere. Does anyone have a line on where to find them? Failing that, could someone take a caliper and give me precise measurements on the parts from their gun? I can mill them if necessary, after all they're just plungers. Thanks all!

Its parts #3 and #5 on this diagram
http://www.gunpartscorp.com/Manufacturers/Mauser-33384/AutoPistols-37346/HSC-35078.htm?results=50

jcorl:
I have had great success with Bob's Gun Shop, FAX 501 767-2750.   He has been in business since 1955.  He use to be open to the public and I always enjoyed going in his store and talking with him.    If he does not have the parts, then there are some other locations out there.  Everyone I think has a favorite vendor.

Good luck with repairs.   You may want to tell us about your HSc.  It is enjoyable to learn what is discovered.

Jim

Warbird:
Welcome to the forum, pakcman.  I checked both eBay and GunBroker for you but no Plungers are currently offered.  You might want to keep a watch on both these sites.

donp326:
You could try Tom Heller to i dont have his contact info handy but others here might.

pakcman:
Thanks guys, I'd appreciate that. The gun I have is a .380, Serial # is 01 xxxx. Grips appear to be wood, and I have two magazines with it.

Navigation

[0] Message Index