Pistols > Model HSC Pistol

Broken trigger spring,reproduce grips and spare mag sources

<< < (2/4) > >>

Tecolote:
Warbird: thanks for the date of manufacture and the eBay link.
Jim: no serial number on the mag, just a plain phosphate(?) finish.


Thanks again for the replays.


Tecolote

donp326:
Tecolate here is the magazine your looking for.

https://www.legacy-collectibles.com/accessories/pistol-magazines/hsc-magazine-ww2-051117.html

The above magazine has been sold.

jcorl:
That is a nice finish.

Jim

Tecolote:
Took it into the gunsmith with a Wolff spring kit. He had no problem putting in the trigger spring but when I went in to check on the progress and tried the action, pulling the trigger in single action, the hammer dropped properly all the way, but in double action the hammer would rise OK, but when it dropped would stop at the half cock position every time. Prior to the new trigger spring it would do the same on single action; if I pushed up on the trigger bar, it would function properly. Do you generally need to adjust the position of the spring? Any suggestions?


Thanks in advance.


Tecolote

Warbird:
The Trigger Bar was probably installed incorrectly.  Remove the left Grip and Trigger Bar.  Cock the Hammer and drop the Trigger Bar back in place.  That should correct your problem.

Navigation

[0] Message Index

[#] Next page

[*] Previous page