Mauser Guns Collectors Forum

Pistols => Model HSC Pistol => Topic started by: donp326 on July 07, 2014, 08:20:41 AM

Title: Problem with my HSc
Post by: donp326 on July 07, 2014, 08:20:41 AM

Every now an then I shoot my HSc.  Well this time when I finished shooting I noticed the extractor, the extractor pin (front) The extractor spring and the the extractor pin rear at the safety end may also be missing but I can't really tell.  If any one has these parts that they are willing to sell I need them to put my HSc back in working order. 

I forund and extractor and extractor spring on the Numerich website so all I need now id the Extractor plunger and the Safety detent plunger


Tom Heller had the Extractor and Safety Detent plungers so I'm set.

Title: Re: Problem with my HSc
Post by: jcorl on July 07, 2014, 02:43:50 PM

Good luck with that job.


Jim

Title: Re: Problem with my HSc
Post by: donp326 on July 09, 2014, 03:05:51 PM

Thanks I'll post how it went upon completion.

Title: Re: Problem with my HSc
Post by: jcorl on July 11, 2014, 02:48:39 PM

Looking forward to your report of success or "other".

Jim

Title: Re: Problem with my HSc
Post by: donp326 on July 17, 2014, 08:23:03 PM

Ending up sending the slide etc to Tom Heller (Lugardoc).  Too much for my thumbs to do.

Title: Re: Problem with my HSc
Post by: jcorl on July 22, 2014, 09:29:37 AM

I was wondering, if you could master that task.  Good decision.  I know, he will do a bag up job.  My thumbs are just as big as yours.  Thanks for sharing your efforts.  It makes me feel better related to my efforts on the HSc.

Jim

Title: Re: Problem with my HSc
Post by: donp326 on July 28, 2014, 02:11:50 PM

He accidently sent me an incorrect plunger that was too big (long).  That increased the spring tension horrendously.  I sent it all back to him and he fixed it the day after he got it.  I get it back two days after that. It looks great and shoots just a good as before.

Title: Re: Problem with my HSc
Post by: jcorl on July 28, 2014, 03:23:37 PM

Gee.  I bet you were trying everthing!!   Happy to hear that it came out great.  I did not know they had made a short and long plunger?   That fact is interesting.  Thank you again for sharing your experience.

Jim

Title: Re: Problem with my HSc
Post by: donp326 on July 29, 2014, 07:40:55 AM

Yes I did, spent several hours before giving up.  The incorrect plunger was in the white.  I am not sure what flavor of HSc it was for. The small end of it would not seat into spring.  That's what gave me the spring compression issues.

Title: Re: Problem with my HSc
Post by: jcorl on July 29, 2014, 10:05:03 AM

Interesting observation.  I wonder if the post war and war ear plungers were manufactured to different specifications.  Or, in reverse, your plunger was not manufactured to correct specs in the first place.  Thanks again for sharing your experience.  It may help one of us, some day. 

Jim

Title: Re: Problem with my HSc
Post by: donp326 on July 30, 2014, 07:21:41 AM

I asked Tom Heller yesterday what the in the white plunger was for.  He told me he wasn't exactly sure but possibly a Walther PP.

Title: Re: Problem with my HSc
Post by: jcorl on July 30, 2014, 10:27:42 AM

The plunger was white?

Title: Re: Problem with my HSc
Post by: donp326 on July 30, 2014, 02:09:00 PM

Yes it was