Mauser Guns Collectors Forum
Pistols => C96 / C12 Broomhandle => Topic started by: QuanLoi on May 06, 2023, 01:05:11 PM
-
The sear arm broke at the point where the hammer contacts the surface of the sear arm. After purchasing a "new" sear arm, the sear would not come in contact with the trigger extension. The use of JB Weld extending the surface of the sear so that it would contact the trigger extension seems to correct the problem. At least now the hammer drops when I pull the trigger. I'll be taking it to the range soon to check it out. It's interesting how useful JB Weld can be. I also used it to lighten the trigger pull of a Luger as well.