Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - vlim

Pages: 1 ... 20 21 [22]
Mauser Lugers / 29/70 Mauser Parabellum
« on: April 30, 2013, 08:21:12 AM »
An example of a boxed, early 29/70 Mauser Parabellum for Intearms.
This one was proofed in Germany at a later time, it never went to the US. An interesting bonus is that the box came with Sam Cummings' business card.

Model HSC Pistol / Re: BLACK HSc CARTONS
« on: April 23, 2013, 01:12:48 PM »
There were similar style boxes for the P08 and P38 as well.

Model HSC Pistol / Re: BLACK HSc CARTONS
« on: April 22, 2013, 02:10:14 PM »
I am pretty sure that Interarms was the source of these. In the 1950s and 60s they sold to other resellers, chain stores and mail order companies as well as directly to the public. This probably explains the absence of any Interarms branding on the boxes.
Shown is my French HSc which came with the black box, numbered to the pistol on the bottom.

The idea was to make them in the USA, but that never happened, as far as I'm aware. The early pistols have the 'Frame made in Germany' marking, but were made entirely in Europe. The 2007 versions no longer have that 'Frame made in Germany' marking.
Also some changes to the markings were carried out. The first variation has the M2 marking in silver paint. The later versions have the M2 marking outlined, etched or machined into the slide.
SIG SAUER in Germany still owns the right to the Mauser banner in combination with hand gun production. Their subsidiary, Blaser, is home to the current 'Mauser Jagdwaffen GmbH' which produces Mauser hunting rifles.

Mauser P38 Pistol / Mauser P38, 1944, re-used by the Bavarian police
« on: April 21, 2013, 09:09:52 AM »
This pistol is one of a few surviving examples of wartime Mauser P38 pistols which were re-used by the Bavarian Bereitschafspolizei in the early post war years. Most of these pistols were eventually destroyed and replaced with new material, as the allies had agreed not to rearm the German services with German-made pre-1945 equipment.
The marking 'ÜW BBPol(s)' means:
Übungswaffe Bereitschaftspolizei Bayern (schussfähig).
which rougly translates into:
Trainingsweapon Bavarian Support Police (shootable).

Mauser P38 Pistol / Mauser P38, byf 43 police version
« on: April 21, 2013, 09:02:40 AM »
This pistol is completely commercially proofed (Eagle/N) and has a police acceptance marking (Eagle/L).
It was delivered by Mauser to the German police in 1943 and has a 2-digit serial number.
The pistol received british proof markings at a certain time, and it turned up in Israel. So it certainly made an interesting journey.

C96 / C12 Broomhandle / Military issue C96
« on: April 21, 2013, 09:00:22 AM »
An example of a military C96 with acceptance stamp on the right side of the chamber.

Mauser Lugers / Portuguese M943 with lanyard and holster
« on: April 21, 2013, 08:57:29 AM »
This final run of 5000 Mauser P08 pistols was not accepted by the german army in 1942, so Mauser sold the batch to Portugal, who introduced the pistol as their M943 model.
Portugal furbished their own particular style of holsters which received the serial number of the pistol. Many were issued with a lanyard as well. This particular pistol has quite a bit of wear at the rear just above the lanyard loop, showing that it was carried with the lanyard for a very long time.
The pistols remained in Portuguese service until 1979 and made their way to the commercial market in the early 1980s. This pistol was sold by Frankonia in Germany.

WTP / Some examples of a WTP 2.
« on: April 21, 2013, 08:53:19 AM »
A Mauser WTP 2 with holster.

Site Technical Help or Site Feedback / Re: Comments/suggestions
« on: April 21, 2013, 08:51:30 AM »
I'm missing the following subforums in the Mauser handgun department:
Mauser revolvers: Reichsrevolver produced by Mauser, Mauser 'Trident' and Mauser 'Hunter' revolvers.
Mauser pistols: The Mauser M2 pistol.
Mauser air guns: Mauser air pistols and air rifles.

Model 1910 Pistol / A well used Sidelatch 1910
« on: April 21, 2013, 08:47:38 AM »
After working on some Mauser documentation related to the M1910 production, including some Mauser calculation sheets and notes on the pocket pistol in the Mauser fiscal year accounts, I thought it was time to locate an example of a side latch, so I could take a good lock at the internals and the differences between the side latch and the later variations.

A fellow collector had one for sale, and I picked it up a while ago. The pistol had an interesting life, the magazine is a well made handcrafted replacement, and the barrel latch is also an old replacement, which was numbered to the pistol.

It is interesting to see the differences in engineering, and I was suprised to find that even the magazines did not exchange. Some of our findings will be published in a series of articles on the early days of the Mauser pocket pistols soon.

Model 80SA / 90DA Pistol / Model 80.SA and 90.DA side by side
« on: April 21, 2013, 08:41:12 AM »
Just some examples of the Model 80.SA and the Model 90.DA side by side.

Mauser Revolvers / Mauser revolvers 1980 - 1998
« on: April 21, 2013, 08:38:55 AM »
As we discussed in other threads, Mauser was struggling to come up with a game plan for the last decades of the 20th century. Investing in major production lines was not feasible due to the limited markets available, so Mauser started shopping around. They used subcontractors to produce pistols and revolvers bearing the Mauser brand name throughout the 1980s and 1990s.

In 1980, German revolver maker Willy Korth had contacted Mauser with the suggestion to sell his company's production facilities to Mauser. Mauser investigated this idea, but decided against it.

Other projects did go through, however and two of those products were also revolvers. The first was the Mauser .38 Special revolver, produced by Renato Gamba (their 'Trident' revolver) with either a 2 inch, 2.5 inch or 4 inch barrel. Variations included one with an additional safety just behind the hammer. The pistols were finished at Mauser, so they could be proofed in Ulm and marketed as 'Made in Germany'.

The second revolver came a good deal later. The "Hunter" model, also a .38 Special revolver, was produced in 1997 for Mauser by the relatively new company of Kora in the Czech Republic. Founded in 1990, Kora set up a line of revolvers in gas and signal calibres as well as popular small calibres like .22lr and also their .38 Special version. The last pistol, the .38 Special Kora BRNO model, was produced in a limited series for Mauser, who marketed it as their "Hunter" pistol. The foreseen buying public being hunters, who needed a pistol or revolver beside their rifles for the 'mercy kills'.

The Mauser Hunter:
The Mauser Hunter is marked on the left side of the barrel with :

Mauser-Werke Oberndorf
"Hunter" Cal. 38 Special

On the right side of the frame, on the detachable sideplate, the Mauser banner is cast in.

The frame of the Hunter is made of a light alloy, in which the steel barrel and cilinder are placed. Grips are of a contoured walnut type, sometimes with a lanyard loop added.

The proof marking is that of the Prague proof house, a Lion/N marking. It is present on the barrel, the frame and the cilinder. The proof year (97) is stamped unter the Lion/N on the left side of the frame.

The Mauser .38 Special (Renato Gamba 'Trident')
This revolver was part of a deal with Renato Gamba in Italy. Renato Gamba got the right to produce and market the HSc pistol in Italy, and Mauser was allowed to market the Renato Gamba Trident revolver on their Markets.

The first Mauser .38 revolvers were sold in 1980. A purchase receipt for a .38 special revolver dated the 6th of November, 1979 mentioned that the delivery time would be around 100 days, so well into 1980. The few revolvers encountered all seem to date from the same era, around 1980. The revolvers were available in 4", 2.5" and 2" barrel lengths, wit an additional hammer safety at request. The revolvers had highly polished walnut grips, a deep dark Mauser blue similar to that used on the Mauser Parabellum and HSc, so it was most likely also provided by Brünofix.

The 2 inch and 2.5 Inch version has the following text on the left side of the (short) barrel:

On the right side there is the caliber:
CAL. 38 SP.

The grips have a small round brass plate inserted, the plate on the right side is blank, the plate on the left side has the Mauser banner stamped on it.

The pistols show Ulm proof markings, the Eagle/N, a 2-letter date code IA for 1980 and the Ulm antler on the bottom left of the frame. Cilinder and barrel also have the Eagle/N proof marking. The cilinder is marked with the pistol's serial number. The serial number is struck on the right side of the frame.

A new one pops up...

In 2000, German based gun company Sig Sauer decided to put their right to use the Mauser brand name to good use. They marketed a pistol called the Mauser M2 in the calibers .45 ACP, .357 SIG and .40 S&W. It is most likely that the pistols were made in Germany, but they bare the name of SIGARMS USA, alongside the Mauser banner on the slide. The pistol was intended for the US market and you rarely see them for sale in Europe. Which in turn seems to indicate they were manufactured in the US.

Test firing sheets, however, show that at least a number of them were test fired and signed off at the Sig Sauer factory in Germany. So judging from this it is safe to assume that they were indeed manufactured in Germany at Sig Sauer. The fact that these pistols also have 'MADE IN GERMANY' on the frame is another indication of the gun's German heritage.

The pistol is equipped with grips that also show the Mauser brand name, complete with a (R)egistered marking. The Mauser banner is also imprinted on the base of the, MecGar made, magazines.

It uses a rotating barrel, is striker firing (no hammer) and has numerous safety features.

Sig Sauer had purchased the right to the Mauser brand name for small arms around 2000, allowing a related company, Blaser, to set up a division under the 'Mauser Jagdwaffen GmbH' name. This division focused on hunting rifles, based on the M98 action.

A recently obtained example was delivered from the factory in Germany in a Sig Sauer marked case (the US versions were shipped in green plastic cases with a gold Mauser logo). Barrel proof date is 2003. Production ran between 2000 - 2006 and it seems that Sig Sauer had a number of pistols still in storage. The test firing sheet indicates it was tested at the factory AFTER 2008.

General Discussion / Re: Welcome!
« on: April 21, 2013, 08:33:01 AM »
Looks nice, and lets hope that the Mauser collecting community will find and enjoy the forum!
The verification codes on every post are a bit of a downside to me. I think that extra verification for members who are logged in should not be needed.

Pages: 1 ... 20 21 [22]