1
C96 / C12 Broomhandle / Re: Lock frame help
« on: June 23, 2022, 10:14:44 AM »
A friendly reply deserves a friendly ignore.
Mauser Guns Collectors Forum
A Gun Collectors Web Site
News:
Our forum has reached over 1385 total members! Start a new conversation today! We wish you well this holiday season.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
C96 / C12 Broomhandle / Re: Lock frame help
« on: June 22, 2022, 12:28:00 PM »
As mentioned previously, please provide pictures of the broken piece for further clarification.
3
C96 / C12 Broomhandle / Re: Lock frame help
« on: June 22, 2022, 05:37:26 AM »
I don't know, but I personally didn't understand the question at all. What's wrong with the gun and what are you trying to weld? Is the extractor broken?
4
C96 / C12 Broomhandle / Re: Large Ring C96 Broomhandle - additional and unusual markings
« on: February 11, 2022, 10:00:10 AM »
Well, the topic starter probably doesn't want to solve his riddle...
5
C96 / C12 Broomhandle / Re: Large Ring C96 Broomhandle - additional and unusual markings
« on: January 16, 2022, 05:49:26 PM »
It's certainly not an abbreviation for an infantry regiment.
6
C96 / C12 Broomhandle / Re: Large Ring C96 Broomhandle - additional and unusual markings
« on: January 14, 2022, 05:02:27 AM »
May I ask you for the serial number? I know another Mauser with J.r. characters and with the same series 20xxx.
7
C96 / C12 Broomhandle / Re: Help!!!! I need a new style extractor for my C-96 Red 9
« on: November 14, 2021, 03:08:44 PM »
on ebay.com auction number: 255186972929
9
C96 / C12 Broomhandle / Re: Stuck Lock Frame Stop
« on: January 23, 2021, 10:28:30 AM »
You know for sure that pressing the Lock Frame Stop is only successful when the hammer is in the cocked position?
10
C96 / C12 Broomhandle / Re: Cone Hammer Trigger
« on: January 01, 2021, 11:42:40 AM »
I see, thanks again for sharing it! It´s a beautiful weapon!
11
C96 / C12 Broomhandle / Re: Cone Hammer Trigger
« on: December 31, 2020, 04:02:24 PM »Thanks for serial number, i really appreciate it!
Since you wrote a couple posts back, that the serial number starts with 85, i assumed you bought the 8548 model from Hermann Historica, since your pistol showed some similiar blemishes.
Was this just a typo or it is it a different weapon?
12
C96 / C12 Broomhandle / Re: Cone Hammer Trigger
« on: December 30, 2020, 01:13:34 PM »
Thanks for the pictures, these are great!
I´m glad to hear that the trigger came off with no issue.
I´m still interested in the serial number, would you mind sharing it with me?
I assume that i probably won´t need it, since i´m assuming that the last two digits are 48, but it would be great to know for sure.
I´m glad to hear that the trigger came off with no issue.
I´m still interested in the serial number, would you mind sharing it with me?
I assume that i probably won´t need it, since i´m assuming that the last two digits are 48, but it would be great to know for sure.
13
C96 / C12 Broomhandle / Re: Cone Hammer Trigger
« on: December 05, 2020, 06:51:23 AM »
I'm curious, did you manage to get it out based on the steps provided?
Also, would you mind sharing some images of your weapon?
Ideally like one from each angle (top, back and from the side)
I'm particular curious about the serial number and how it looks overall.
If you are hesitant to share it in public, i would be grateful if you could share it with me via PM.
I would like these images for my collection.
Also, would you mind sharing some images of your weapon?
Ideally like one from each angle (top, back and from the side)
I'm particular curious about the serial number and how it looks overall.
If you are hesitant to share it in public, i would be grateful if you could share it with me via PM.
I would like these images for my collection.
14
C96 / C12 Broomhandle / Re: Cone Hammer Trigger
« on: December 02, 2020, 04:40:08 AM »
In general, as you can see on the picuture, the piece is sitting on two nodges (A and B), so you need to lift it first up a bit (C) and then in pull in direction D.
Normally the piece should slide out easily after a bit of pressure. If it does not slide out easily, then it usally means its corroded or there is some dirt there.
I suggest you try some rust remover or some other cleaning product.
If its stuck there due to dirt, you may use some wood piece to carefully hammer it upwards.
Normally the piece should slide out easily after a bit of pressure. If it does not slide out easily, then it usally means its corroded or there is some dirt there.
I suggest you try some rust remover or some other cleaning product.
If its stuck there due to dirt, you may use some wood piece to carefully hammer it upwards.
15
C96 / C12 Broomhandle / Re: Cone Hammer Trigger
« on: November 25, 2020, 04:54:18 AM »
Thanks for the explanation. I think my question has been misunderstood. Then I ask differently: Do you have a certain Conehammer pistol or do you just want to improve your general knowledge?
Pages: [1] 2