Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - gorseks

Pages: [1] 2
1
Thank you so much for the date information.  I wish I could post the photos but the web sight gives me error notices when I attach them.

2
Looking for a manufacture date for a Mauser 1914 WWI Military proofed pistol:  SN 57631


Unfortunately, I have tried multiple ways to post photos of the pistol, but to no success. 

3
Model HSC Pistol / Re: WWII HSC in .380
« on: November 15, 2022, 08:56:27 PM »
Thanks for the information.   I went into the shop and sized the barrel;   clearly a 7.65mm.   I let them know to correct their listing.   

4
Model HSC Pistol / WWII HSC in .380
« on: November 12, 2022, 04:25:36 PM »
During WWII, did Mauser produce a wartime HCS in .380 (9mm Kurz).   


I searched the web and could not find any definitive answer. 


I found an HSC WWII listed as .380, and I was not aware of any produced.   


SN:  878010


Thanks in advance for your attention.  Steve

5
Model HSC Pistol / Re: Need Input: Original WWII grips ??
« on: December 24, 2017, 09:43:10 PM »
I forgot to ask; 


What is the production date of this pistol


Merry Christmas

6
Model HSC Pistol / Re: Reassembly
« on: December 20, 2017, 12:20:17 AM »
Okay, I have it re-assembled and working properly now.  All the tips helped tremendously.


One question;  late war and mid-war range magazines;  are they interchangeable.  I have noticed that when I purchased another HSc off gun broker SN 897260 (and by the way, thanks for the input on the grips issue), the magazine from the mid-war HSc (SN 781899) does not chamber rounds very well in the late war HSc, if at all.  Just a coincidence for this magazine or a standard difference in the types of magazines.


Much appreciated, Steve

7
Model HSC Pistol / Re: Reassembly
« on: November 23, 2017, 12:15:46 AM »
thanks Warbird;  I will start working on this and get to the bottom of it.  I ordered new spring (relatively inexpensive) and will check that process out.  I will keep you posted.

8
Model HSC Pistol / Need Input: Original WWII grips ??
« on: November 23, 2017, 12:11:18 AM »
This HSc is on gunbroker.com for sale, and seller indicates all WWII original. 


Grips appear Interarms type checkered patterns.  Were any of the WWII pistols using this type of grips (I could not find any on the internet.


The rest of the pistol looks good and accurate, but if any comment on that would be appreciated.

9
Model HSC Pistol / Re: Reassembly
« on: October 22, 2017, 07:25:39 PM »
Sorry, forgot to add photos

10
Model HSC Pistol / Re: Reassembly
« on: October 22, 2017, 06:22:22 PM »
Hi all, i am having a similar issue as posted here and have followed the above steps.  (I am replacing the hammer on my 1943 HSc with another wwii hammer purchased and bothl parts match and no signifcant wear on the replacement hammer;  the original hammer thumb grip broke off when firing).


I had the same problem of the guide lever sticking up, then pushed it down before placing the hammer hinge pin.   Pistol then re- assembled properly and all functioning except one issue;


I can remove the magazine when the slide is in resting position, but cannot remove the magazine after the slide is racked back/locked position, no matter how i press the magazine catch release  (unless i reach in through the ejector port, press down on the magazine follower and let the slide move forward; i can then release the magazine). 


Any thoughts or ideas?


Much appreciated,  steve

11
Model 1910 Pistol / Re: Looking for manufacture Date for a 1910
« on: September 24, 2017, 01:49:05 AM »
Also, if I may ask (see attached photo), is this a 1910 or a 1910/1914

12
Model 1910 Pistol / Re: Looking for manufacture Date for a 1910
« on: September 24, 2017, 01:42:13 AM »
Thank you so much.  Very appreciated.  Steve

13
Model 1914 Pistol / Re: Mauser 1914 date of manufacture
« on: September 24, 2017, 01:40:52 AM »
Thank you so much.  Very appreciated.  Steve

14
Model 1910 Pistol / Looking for manufacture Date for a 1910
« on: September 18, 2017, 01:21:38 AM »
I have a mauser 1910 6.35   Sn. 242407   Im looking to find the date of manufacture.  Much appreciated

15
Model 1914 Pistol / Mauser 1914 date of manufacture
« on: September 18, 2017, 01:17:19 AM »
I have a mauser 1914 7.65.   Sn. 241412   Im looking to find the date of manufacture.  Much appreciated

Pages: [1] 2