Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - geert45

Pages: 1 2 [3] 4
31
Model 1934 Pistol / Re: 4. variation KM in great shape
« on: June 12, 2015, 01:31:42 PM »
A nice Mauser, but I'm in doubt about the Safety catch release, it's looks that it not fit in the frame, see last picture.
I never seen a Mauser marked: Mauser-Werke A.G. Obendorf A.N with that kind of safety catch, normal they are flat and the buton in the middle.
This Safety catch release is mostly to see at het Mauser pistol marked: Mauser-Werke A.G. Obendorf A.N *** Patent.
Burgess Mason can tell you more about, as he's an expert of this kind of guns.
Look at this picture.

32
Model 1934 Pistol / Re: assembling a 1934 Mauser 7.65
« on: May 29, 2015, 02:26:56 PM »
Watch the clip in the link at Youtube and works opposite to reassemble. My opinion you has to start with Ejector & hold-open catch, but be careful when you put back the magazine spring, the spring needs to be at the left side of the Ejector & hold-open catch. Look here, http://www.mauserguns.com/forum/index.php/topic,469.0.html, there is picture.
Geert

https://www.youtube.com/watch?v=F3nqTdqMAAE

If you're in doubt, wait for an answer from Burgess Mason, I always giving this advice.

33
Model HSC Pistol / Re: hsc value.
« on: May 13, 2015, 02:58:15 PM »
Looks super clean. What caliber is it?

Jim

Cal. is 7.65 mm or for the US .32

34
Model HSC Pistol / Re: hsc value.
« on: May 13, 2015, 10:55:46 AM »
This commercial I bought last year for 337$..a bargain because the gun is like new.
Regards,
Geert

35
Model 1934 Pistol / Re: Can't slide off - not the usual problem
« on: May 12, 2015, 02:54:15 PM »
You're welcome Burgess..I have respect for you.
Regards,
Geert

36
Model 1934 Pistol / Re: Can't slide off - not the usual problem
« on: May 12, 2015, 04:41:39 AM »
You're welcome, but the most thanks have to go to Burgess Mason, a specialist in this kind of Mausers. He helped a lot of people here at this and other forums and if he write some things about Mausers, read it and read it again. You're never be to old to learn..so I'm 70, and glad there are persons like Burgess.
Regards,
Geert

37
Model 1934 Pistol / Re: Can't slide off - not the usual problem
« on: May 11, 2015, 06:13:50 PM »
Ok..when you re-assamble look at the picture I've sent earlier, that magazine catch spring is on the left side of the hold open device.
Regards,
Geert

38
Model 1934 Pistol / Re: Can't slide off - not the usual problem
« on: May 11, 2015, 04:54:23 PM »
What happen if you remove magazine catch spring?
I think it'ts the only way to make that the slide can moving again without forcing any part.
Else wait for an answer from Burgess
Geert

39
Model 1934 Pistol / Re: Can't slide off - not the usual problem
« on: May 11, 2015, 04:03:54 PM »
Have a look here..I think it's the same problem.
Regards,
Geert
http://www.mauserguns.com/forum/index.php/topic,469.0.html

40
Model 1914 Pistol / Re: Mauser 1914
« on: April 22, 2015, 03:39:14 PM »
Remove the magazine catch spring, possible you mounted the wrong way...when mounting back the magazine spring needs to be at the left side of the Ejector & hold-open catch, as I remember.

Else wait for an answer from Burgess,  the specialist for this kind of Mausers

41
Model 1910 Pistol / Re: Frame number
« on: September 09, 2014, 01:52:04 PM »
Burgess,
My apologies also to call you Bob!
Geert

42
Model 1910 Pistol / Re: Frame number
« on: September 04, 2014, 12:14:46 PM »
Bob,
Here's the number at my frame: 123136 and a little bit lower  only a 4
My serial number: 301575
Regards,
Geert

43
Model 1910 Pistol / Re: Frame number
« on: September 04, 2014, 11:28:51 AM »
Warbird is more of an HSC guy. Would you be interested in what I can provide? If yes, please describe the location of the frame number you are refering to and provide a detailed description of the example you are asking about. Please start with the complete serial number.
 
Regards,

Bob,
I have seen also a number at the frame, not the serial, at my Mauser 1910/14 when I removed the magazine catch once. This evening, when I have time I will check it again and let you know the whole number, possible you know what it means.
Regards,
Geert

44
Site Technical Help or Site Feedback / Re: System Outage 7/25 - 7/28
« on: July 28, 2014, 02:51:57 PM »
Ok here also!
Geert

45
Model 1914 Pistol / Re: Mauser 1910/14
« on: June 18, 2014, 05:30:45 PM »
Thanks for the help!

Pages: 1 2 [3] 4