Mauser Guns Collectors Forum

Pistols => C96 / C12 Broomhandle => Topic started by: William Hull on January 10, 2021, 02:56:08 PM

Title: Stuck Lock Frame Stop
Post by: William Hull on January 10, 2021, 02:56:08 PM
I have a Red 9 that I can't get the lock frame stop to budge. I am sure other have had this problem in the past. Looking for advice on freeing up the stop.
Thank you
William
Title: Re: Stuck Lock Frame Stop
Post by: Osmosis on January 21, 2021, 09:46:30 PM
Did you solve this issue? I have no better suggestion than spraying the rear with oil and just keep rocking the hammer and safety until the lock starts to budge. You probably tried that....
Title: Re: Stuck Lock Frame Stop
Post by: 1914mauser on January 22, 2021, 07:00:16 AM
William, it is very difficult if not impossible to diagnose and resolve mechanical issues via this type of communication. I would strongly suggest trying to find a competent gunsmith in your area or you may find it necessary to send your pistol to someone familiar with C96s. If your Red-9 is in collectable condition its value warrants it being handled by someone who knows what they are doing. Regards,
Title: Re: Stuck Lock Frame Stop
Post by: fasenda on January 23, 2021, 10:28:30 AM
You know for sure that pressing the Lock Frame Stop is only successful when the hammer is in the cocked position?