11
C96 / C12 Broomhandle / Re: C96 Magazine Floor Plate
« Last post by 1914mauser on March 12, 2024, 11:16:44 AM »We would need to more about your C96. I suspect that you may have a non-Mauser C96. Regards,
Mauser Guns Collectors Forum
A Gun Collectors Web Site
News:
Our forum has reached over 1385 total members! Start a new conversation today! We wish you well this holiday season.
Recent Posts
12
C96 / C12 Broomhandle / C96 Magazine Floor Plate
« Last post by Djlmedic on March 10, 2024, 08:06:11 PM »Good evening everyone,
I have a C96 Mauser that needs a magazine floor plate. I ordered one but it is not the correct one. The one of the left of the picture is the old one that is wider at the point that it locks into the magazine well. Can anyone advise why mine is not like others that I’ve seen?
I have a C96 Mauser that needs a magazine floor plate. I ordered one but it is not the correct one. The one of the left of the picture is the old one that is wider at the point that it locks into the magazine well. Can anyone advise why mine is not like others that I’ve seen?
13
C96 / C12 Broomhandle / Re: Resleeving/relining C96 barrel
« Last post by 68coupe on March 10, 2024, 10:40:41 AM »Thanks for the lead. I've also recently found another gunsmith shop both capable and willing to take the job. It was formerly owned & operated by the late Bob Dunlap of the American Gunsmith Institute videos. Pisco, AKA, Pacific International Service Company. I'm not quite ready yet, but when I am, I'll likely use them, $200-250 (+tax & shipping), with a 2-3 month turnaround.
Thanks, Karl, 68coupe
Thanks, Karl, 68coupe
14
C96 / C12 Broomhandle / Re: Resleeving/relining C96 barrel
« Last post by Foxhound1331 on March 09, 2024, 11:36:41 PM »Howdy 68coupe,
not sure if you are still in search of someone to rebarrel/reline your C96, but Lugerman has a range of options available.
I have not used his services personally, but the quality of his work demonstrated by his .45 & 10mm Luger reproductions are imo second to none!
Link to C96 barrel work: [size=78%]https://lugerman.com/product/c96-barrel-options/[/size]
Best of luck!
not sure if you are still in search of someone to rebarrel/reline your C96, but Lugerman has a range of options available.
I have not used his services personally, but the quality of his work demonstrated by his .45 & 10mm Luger reproductions are imo second to none!
Link to C96 barrel work: [size=78%]https://lugerman.com/product/c96-barrel-options/[/size]
Best of luck!
15
C96 / C12 Broomhandle / Proof Marks Guide/ Help Identify
« Last post by Foxhound1331 on March 09, 2024, 11:10:42 PM »Hello everyone, this is my first post! 
I need some help identifying/deducing some provenance through proof-marks on what I believe is a Pre-War commercial Mauser C96.
I have attached photos below.
1.) "Germany" (import marked? if so by whom and or where?)
2.) Proof mark under barrel
3.) #8 in the underside interior of the upper
Any help is greatly appreciated!
Cheers!
I need some help identifying/deducing some provenance through proof-marks on what I believe is a Pre-War commercial Mauser C96.
I have attached photos below.
1.) "Germany" (import marked? if so by whom and or where?)
2.) Proof mark under barrel
3.) #8 in the underside interior of the upper
Any help is greatly appreciated!
Cheers!
16
Model HSC Pistol / Re: HSc Production Chart
« Last post by dh9733 on March 07, 2024, 09:10:10 PM »I have a Mauser Werke A.G. Obefrndorf a N. Serial number 779462. It has the low screw on the handle and the eagle with a N under it on the slide and on the trigger guard. Can anyone provide and information on this gun. Thanks
17
Model HSC Pistol / Enter the Mauser HSr
« Last post by vlim on March 01, 2024, 11:49:12 AM »Shown at the 2024 IWA.
A Sig Sauer P230 based 'Mauser' version, labeled HSr... in .22lr.
A Sig Sauer P230 based 'Mauser' version, labeled HSr... in .22lr.
18
Model 1934 Pistol / Re: Mauser 1934 firing pin not disengaging trigger bar
« Last post by 1914mauser on February 29, 2024, 01:35:09 PM »1923 would be the year of manufacture of your .25. Regards,
19
General Mauser Pistol Questions / Re: Unit markings C96 Prewar Commercial?
« Last post by 1914mauser on February 29, 2024, 12:57:58 PM »It could be an Imperial unit marking. You might want to post on Still's Luger forum. Regards.
20
Model HSC Pistol / Re: Assistance with date of manufacture of "commemorative" Mauser HSC380ACP
« Last post by vlim on February 26, 2024, 08:56:26 PM »This was the only separately numbered end-of-contract range done for Interarms.
Some American Eagle marked overrun slides made it into german commercial production, numbered as regular HSc pistols.
Some American Eagle marked overrun slides made it into german commercial production, numbered as regular HSc pistols.