Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Pjb11661

Pages: [1] 2
1
WTP / Re: WTP 1 complete disassembly and assembly
« on: April 14, 2022, 09:23:04 PM »
I hope they help you out.  Just cleaning or do you have a issue with your pistol?

2
WTP / Re: WTP 1 complete disassembly and assembly
« on: April 14, 2022, 08:54:52 PM »
I will send you the pdfís

3
Model 1910 Pistol / Re: 1910 and 1914 plastic grips
« on: July 06, 2021, 08:21:30 PM »
Thanks.  I suspected they had molding marks but just needed to confirm. 

4
Model 1910 Pistol / 1910 and 1914 plastic grips
« on: July 05, 2021, 01:27:13 PM »
Hello all,
Does anyone know if they is any labels or markings on the inside of the 1910 or 1914 grips.  Weíre they more precision molded on the inside, or were they somewhat rough.  Pictures would be great if you have them.  I have several and I canít tell if they are original.  They donít look as rough molded as some of the reproductions I have seen.

5
WTP / Re: My pore little friend
« on: February 08, 2021, 11:28:12 PM »
Sorry to here about your issue.  That the problem with Gunbroker is that you never really know what youíll get until you have it in your hands.  You are correct that the parts will be very hard to find.  Over the years, I have found a few parts for WTP 1ís on eBay and gunbroker, but they done come up often.  If you email me at pjb11661@gmail.com, I have a name of someone who might have parts.

6
WTP / Re: Mauser WTP 1 grips
« on: February 08, 2021, 10:59:11 PM »
Thanks.  I bought one from them a while back and the quality wasnít very good.  They didnít even come close to fitting.

7
WTP / Re: WTP 1 complete disassembly and assembly
« on: January 03, 2021, 11:38:39 PM »
Sent to Psnabes

8
WTP / Re: WTP 1 complete disassembly and assembly
« on: January 03, 2021, 01:25:55 PM »
Gauffin561 have sent you photos via email

9
WTP / Re: WTP 1 complete disassembly and assembly
« on: January 03, 2021, 02:49:45 AM »
gauffin561@comcast.net I am working on my wtp1 so I can take and send some detailed photos

10
WTP / Re: WTP 1 complete disassembly and assembly
« on: January 03, 2021, 02:47:58 AM »
Psnabes please send your email address.

11
WTP / Re: WTP 1 complete disassembly and assembly
« on: January 03, 2021, 02:47:11 AM »
Sent to Ankhearty

12
General Mauser Pistol Questions / Re: Mauser manuals
« on: September 22, 2020, 10:30:25 PM »
Has anyone seen or heard of a Mauser WTP 1 manual dated 3/31?  Itís in German.

13
Model 1910 Pistol / Re: Split-base floor plate removal
« on: July 19, 2020, 01:10:18 PM »
The bottom end of the magazine spring forms a lock for the base plate.  Using the side cutouts in the magazine, you need to work the bottom of the spring up and out of the way before you tap the baseplate off.

14
WTP / Late model WTP 1 magazine
« on: July 18, 2020, 08:51:20 PM »
SN 47318. The Pender book calls for a magazine with a square front floor plate with banner.  It came with a round front floor plate with banner like the WTP 2.  I donít see a round front floor plate with banner in the book for a WTP 1.  Does anyone know if a change to the magazine occurred prior to the transition in models/

15
Model 1910 Pistol / Re: 1910/14 .25 ACP magazine questions
« on: July 16, 2020, 10:20:18 PM »
Thatís great news! Enjoy shooting it!

Pages: [1] 2