Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - fred klinknagel

Pages: [1] 2
Mauser Lugers / Mauser made P08
« on: November 29, 2021, 02:08:18 PM »

 Today I have cleaned an other P08 from the collection.
 I was in a display for about 20 years and some little rust was on the weapon and the spare mag and also on the tool.
 With oil and very fine steel wool it looks fine again.
 This one is marked S/42  and dated over the chamber :1938      Serial number 8046G     "wehrmacht abname " markings
 all numbers matching.
 Two magazines number 8046  and original tool.
 Including nice holster with name on the inside.
 Great condition


Mauser Lugers / Mauser Luger
« on: November 23, 2021, 03:18:41 AM »
This Mauser made P08 is in our museum collection.It was in the safe for 20 years.
-Mauser Banner ,G on top of the chamber,1 proofmark : u with crown
serial number :1586 .
Magazine is  nikkel plated with wooden bottom.

C96 / C12 Broomhandle / Bolts
« on: October 24, 2020, 02:44:30 PM »

 Just recieved 2 deactivated c96 bolts from an old German collector.

 Pic  1: the two bolts

 Pic   2: same , with a bolo bolt


C96 / C12 Broomhandle / magazine bottom plate 6 schot
« on: September 26, 2020, 04:00:43 PM »

 Hello ,I am looking for some pics of a magazine bottom plate of the 6 schot C96 pistol.

 Regards Fred

C96 / C12 Broomhandle / deactivated fir sale
« on: August 29, 2019, 03:21:27 PM »
Have seen this deactivated c96 for sale.
- barrel step like the M1930
- grips like the M1930
- old model grip frame
- new model safety ( lever is missing )
- NS on the hammer
- Small Mauser monogram on left side ( like the late bolo )
- matching numbers : 601xxx

C96 / C12 Broomhandle / what's a good price for a flat side
« on: June 09, 2019, 03:50:57 PM »
Need some info .
Can buy a matcing numbers good condition flat side .
Have to make a bid.
Is there some info about prices ?
thanks ,fred

C96 / C12 Broomhandle / Frankenstein Mauser
« on: February 17, 2019, 09:44:22 AM »
Have found this Mauser in a collection of a private collector.
Deactivated to European gun laws.
Excuse me for the bad pics.

Regards Fred

C96 / C12 Broomhandle / Bolo Stock
« on: February 12, 2019, 04:50:31 PM »
Have seen a Mauser "Bolo" stock for sale.
All like the normal stock but a bit shorter.
Must be a very rare stock ,made for the bolo.
I have never seen something like this before and did not know Mauser made this.
To me ,making the stock shorter made no sence,making it harder to shoot.
My question : is this a real "Bolo" stock ?

Regards Fred

C96 / C12 Broomhandle / Made in China
« on: January 10, 2019, 06:17:29 PM »
When surfing the internet found a Chinese site with an interesting "Wauser"

C96 / C12 Broomhandle / chinese marks
« on: January 02, 2019, 10:35:58 AM »
Have seen a c96/ m30 for sale.
On the left are 3 chinese marks.
What is the meaning of this ?

C96 / C12 Broomhandle / Chinese .45
« on: December 27, 2018, 09:23:04 AM »
Last pics.It is fore sale a very long time now.
Today I visit him and took some pics.
It's in a good condition.

C96 / C12 Broomhandle / Chinese .45
« on: December 27, 2018, 09:19:49 AM »
some more pics

C96 / C12 Broomhandle / Chinese .45
« on: December 27, 2018, 09:18:29 AM »
For sale in mu friends gun shop

General Discussion / Mauser book
« on: December 16, 2018, 03:25:30 PM »
Hello ,today I received from a friend the book : Mauser Rifles & Pistols ,by W HB Smith 1946.

It is in pdf file.

If you are interested : send me an email and I'll send you the pdf file.


C96 / C12 Broomhandle / Replica mauser Carabine
« on: December 12, 2018, 01:09:50 PM »
Hello, I'd like the " Mauser karabiner" very mutch.But the are hard to find and very expensive.
A few years back I found one for sale in Germany.It was changed to 8 mm blankfiring ( common caliber in Europe)and for that reason sold as a "salut" gun.Soon I knew that it was a fake.No matching numbers and build by Navy Arms from Chinese "scrap " guns.It was no collector item and I started to make it a bid more looking like the real deal.Took some time .Found a nice picture on the internet and made my own "look a like ". Some off the changes : longer for grip ,hand made buttplate from bone,
12 ich barrel in caliber 9x23 largo,new frontsight ,cone hammer(home made),some changes in the milling patern on the frame.


Pages: [1] 2