46
C96 / C12 Broomhandle / Re: Chinese c96 HELP!
« on: September 04, 2018, 12:42:00 PM »
should sell with no problem good luck on the sell
Mauser Guns Collectors Forum
A Gun Collectors Web Site
News:
Our forum has reached over 1385 total members! Start a new conversation today! We wish you well this holiday season.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
47
C96 / C12 Broomhandle / Re: Chinese c96 HELP!
« on: September 04, 2018, 12:39:48 PM »
i doubt it. stripper clip will hold 9mm or 30 cal. i bet the 30 cal will not fit in your mag. next time i go down into the basement i will try and load a 30 cal into the 9mm mag. i bet it want go in the mag because of the shortened follower and the spacer i was telling you about
48
C96 / C12 Broomhandle / Re: Chinese c96 HELP!
« on: September 04, 2018, 11:48:29 AM »
here is a pic i hope of my schnell in the middle of table
49
C96 / C12 Broomhandle / Re: Chinese c96 HELP!
« on: September 04, 2018, 11:44:55 AM »
this is mine
50
C96 / C12 Broomhandle / Re: Chinese c96 HELP!
« on: September 02, 2018, 04:28:17 PM »
i think they refer to it as tu711 i think navy arms sold them maybe $1200 or a little more
52
C96 / C12 Broomhandle / Re: Chinese c96 HELP!
« on: September 02, 2018, 04:17:35 PM »
when you look at the magazine . is their a spacer that has been welded inside the mag that takes up space so a 9mm can be loaded?it runs top to bottom and would be inside mag at front of follower?
53
C96 / C12 Broomhandle / Re: how to dissemble broomhandle wooden stock
« on: July 30, 2018, 08:08:16 AM »
i remembered one other thing i had to do. when i found that the old nut would spin when you tried to turn the screw with a screw driver, i put a little small drop of glue on the nut not on the threads and let it dry. this kept the nut in place and the screw was able to be removed. it worked for me.luck of the polish i guess. 
54
C96 / C12 Broomhandle / Re: different grip
« on: July 22, 2018, 07:40:29 PM »
1000 m sight was for 30 cal 0-500 m was for 9mm just make sure what you have before you shoot it. i waited around a large gun shop in marietta ga for the owner gun smith expert to get back from lunch to tell me what i had. 30 cal no mistake. took it to another gun shop they put snap caps in it and it was 9mm The grips where not marked with the red nine, i now have 13, 9mm, 1- 30 cal and a snell in 9mm
55
C96 / C12 Broomhandle / Re: how to dissemble broomhandle wooden stock
« on: July 22, 2018, 07:31:36 PM »
you will need to apply a little kroll to the screw thread on the locking device that connects to the grip and let it soak in. have had to do this every time maybe put some on all screw threads. i also had to buy some replacement screws from the guy over in England cmr kind of pricey $$$
57
C96 / C12 Broomhandle / Re: WTB: Schnellfeuer magazines
« on: July 14, 2018, 08:30:50 PM »
ive ordered from the one over in England. shipping was no problem. he said he had original 9mm but i sent it back, i think it was from china . didnt fit very well either.
58
C96 / C12 Broomhandle / Re: WTB: Schnellfeuer magazines
« on: July 14, 2018, 10:25:44 AM »
Not sure if you will find any below $250 . I watch GB all the time .i buy spare parts on there when i think i may need back ups. Schnell parts are hard to find when you are need of them.I have about 7 -9mm made for the 714 and about 8 -made for the 30 cal. I found a 9mm upper and it works great . hope you find what you are looking for repo can be found for $100 but didnt have any luck.Did you find a stock yet?
59
C96 / C12 Broomhandle / Re: Cleaned Pistol and now won't cock
« on: April 27, 2018, 10:38:54 PM »
when you took it apart the first time how far did you go in taking it apart. is the hammer spring in correctly .i think its the wishbone looking spring located on the side of the lock frame. also was thinking of the bolt stop being installed backwards good luck let us know what you fine out
60
C96 / C12 Broomhandle / Re: Cleaned Pistol and now won't cock
« on: April 27, 2018, 12:06:25 PM »
i have 13 red nines and one schnell. had issues with the selector switch finally figured it out, parts are hard to come by for sure,try to buy whenever i see them