61
Model HSC Pistol / Re: HSc reassembly
« on: August 30, 2018, 12:57:53 PM »
After more thought, I just don't see how the Magazine Safety is blocking the Slide unless it is coming off its pin. Check that it is almost flush with the Frame. Then check that the Guide Lever (center of the Sear) is all the way down. Finally, I would like you to take the Barrel out of the Slide and insert it into the dovetail on the Frame. Your checking for fit here to be sure it is solidly locked into place with no play at all.
Let me know if any of that worked and if you have any questions on the above. Again, Magazine out, Hammer cocked, and Safety ON when reassembling.
Let me know if any of that worked and if you have any questions on the above. Again, Magazine out, Hammer cocked, and Safety ON when reassembling.